How to Tie a Needle Knot: A Step-by-Step Guide?

  • By: joleenllorence
  • Date: May 29, 2023
  • Time to read: 12 min.

If you are a fan of fishing or sewing, understanding how to tie the needle knot is an important ability to possess. It is a tiny knot that can tie fishing lines or thread to the needle. There are many methods of tying knots in the thread. We have provided step-by-step instructions for how to tie a needle knot? How to tie a sewing knot? 

To finish sewing the thread, tie a knot with your hands. Because of the length of the thread, this will be easy for certain people, but difficult for some. To make a loop, backstitch your last stitch. Utilizing your forefinger, makeup to three loops on the thread’s other end. 

Instead of pulling instead, thread your needle through the loop, creating two loops. To create the third loop, put your needle into the second loop, and pull back. Then, spin it using your thumb to ensure it’s not mixed up. To secure the knot, gently pull the needle to secure the two loops.

Knots Can Be Tied Using a Knot That Is Made Of Bullion

An interest in how to tie a needle knot? Stitch to create simple patterns is the bullion knot. It’s an extended knot that can be stitched together to create dense patterns. The bullion knot, which is a small component of the thread, is almost unnoticeable. When threading your needle makes sure the thread ends are against the eye of the needle. 

Twirl the thread around two or three times across the needle. Pull the needle as you pass the thread’s ends beneath the final twist. The thread gets tighter as you pull it and then ease the twirls down it. 

To finish your stitch, you need to pass the needle through the fabric. The knot that is formed in the thread will block the stitch from going on. After the thread has been cut, your beautiful knot will be visible.

  1. Create a Knot by Using a Backstitch

Instead of being able to move the thread ahead like normal, the back stitch is made by moving it backward. It can handle curves effortlessly. Every stitch appears continuous because there aren’t any gaps between them. You can stitch the backside of the fabric. The thread must be pulled until you see a small loop. 

Create a Knot by Using a Backstitch

Thread the thread through the loop a second time using the needle to create a smaller loop. To secure each loop, thread your needle through the next loop. This will result in a neat knot at the end that secures the stitching. To stop the seams from separating make sure you tie the ends of your sewing using this easy and quick method.

  1. Make a knot with an edging stitch or a locking stitch

The tacking stitches, also known as “locking stitch,” is typically used to secure the two fabrics as the actual stitches are being constructed. The tacking stitch is a method of holding the thread’s ends instead of making knots. Because it keeps the thread, it accomplishes the exact purpose of knots. 

A knot with an edging stitch or a locking stitch

Begin stitching on several threads on your material when you have finished stitching. Utilizing your needle, take three or two threads. Return to the exact spot and take two threads once more and this time create loops. 

The thread should remain in a loop instead of simply laying it out flat. To tie a knot, thread the needle through this loop and then tighten it. To secure it even more you can add another loop, and repeat the process.

  1. Knot using loop knot stitch

By double-over a line at the end and then knotting the two thicknesses of the line into an oblique knot that leaves a loop you can make loop knot stitches. Another technique for securing threads without knots is this. In the beginning, fold the thread in half across the middle. 

Knot using loop knot stitch

On one side there is an elongated loop and on the other side, the tail. The tail is held in a shorter length. Through the eye of the needle, move both tails. Through the fabric then insert the needle. The needle should be inserted and then brought through the fold of the thread, making sure to not pull the entire length. When it is securely set in the fabric, pull the thread tight.

  1. Make a knot with Double backstitch

How to tie a knot at the end of sewing? Double back stitches are made by stitching two rows of back stitches around the narrow side and then crossing between one and the other side to create a herringbone design on the opposite side. 

The ability of this stitch to be reversed makes it perfect for shadow work when it is used on transparent base fabrics such as cotton lawns, organdie cotton, etc. An excellent place to begin is to sew two backstitches over each other. Take the needle off the thread once the sewing length is finished. 

Make a knot that resembles the shoelace knot by putting one of two thread’s ends on either side. Based on how long the thread is, you may tie it several times. It’s not exactly a knot, but it’s more of a simple, flat way to hold the thread in the right place.

  1. Sew a Knot Using the Sewing Machine

If you have a sewing machine, you can swiftly make a knot to complete your stitching. The loop that was created from the previous stitch should be pulled through into the back, in the shape of a loop as you sew the stitching line. 

Pins can be used to pull the loop to the other side. Then, two threads may be tied to form a knot. A knot that is tied in the beginning and the end can be sewn swiftly and easily with the sewing machine. Therefore, making knots like these doesn’t require any effort. 

The seven fundamental ways to create knots in sewing are easy ways to start any sewing task regardless of whether you’re hand sewing or using a machine. There are other knit stitches that you should be aware of as well. They are crucial to understanding.

Needle Knot Tying Instructions

Make sure the needle is slightly larger than the point of the lead. Use the needle to push it gradually into the middle in the center from its end to a depth of approximately 1/8 inch. The needle should be pushed from the end of the line. Keep it there for a few minutes to make the hole larger within the fly line then take it off.

how to tie a needle knot

Simply feed the small portion of the leader into the hole that you just made on the side to ensure that it is. The fly line exits at the end of the line. You can pull the entire leader through, leaving 8 inches of the leader out of the hole that you want to secure it.

Place a smaller needle, toothpick, or nail onto the line. Then wrap the leader 5 times over the fly line as well as its needle (or nail) as well as itself moving towards the point where you reach the end of the line.

Utilize your needle’s eye or the area created by the nail to put the leader under wrappings, in opposite directions the wraps. Then, take off the nail or needle and then pull it tight. Remove all excess slack off the lines, and work through the wraps to your exit holes.

  • Wrap-Around-Your-Finger Knot

Then, take the thread’s end and place with your thumb your forefinger. Wrap the thread 2 or 3 times on your forefinger making sure to wrap around the entire length.

With your thumb and forefinger on your other hand, roll the wrapped thread downwards and away from your finger. You’ll be left with a “wreath” of thread.

In the beginning, pinch it between your thumb and forefinger and then pull it off from your needle. The wreath should be tied in an elongated knot.

How to Tie a Knot around the Needle?

Cut a thread that is 18”-20” in length. Place the thread into your needle’s eye. Keep the needle with your right hand, while holding the thread’s end in your left hand.

Put the needle over the thread, about 1/2 away from the end. Set both of them on the pads of the index finger in the right hand. Place them on the pad. Utilizing your left hand, wrap the thread counterclockwise around the edge of the needle two or three times.

Take the threads wrapped around the needle by grabbing them with your thumb and index fingers of your right hand to ensure they remain around the needle. Utilizing your left hand, gradually move the needle upwards until the threads tightly wrapped around the needle are closer to the eye on the needle.

Place the tip of the needle and place it between your thumb and the index finger on your left. The needle should be pulled upwards (the nail on your thumb and index finger on your right hand should sit just above the threads that are wrapped.)

Make sure the threads are pulled along down while pulling the needle upwards until a knot is formed near the top. The art of knot-making requires practice. You can tie several knots in one row until you’re aware of how to make knots by wrapping them around the needle.

Stopper Knot

A stopper knot is tied at the end of a rope to stop the rope from unraveling or slipping through a knot or slipping back through an opening, block, or another device. This particular version, known as the Ashley Stopper knot, also known as the oysterman’s stopper, was invented in the hands of Clifford Ashley around 1910. 

It is a well-balanced stopper with a trefoil face on the other end. It provides greater resistance to pulling out an opening than the other stoppers. The knot is an ordinary Overhand knot, with the rope’s end passing through the eye of the noose and closing it. Also, see the Double Overhand Stopper Knot. Scroll down to see an animated stopper knot beneath the image, as well as the instructions for tying it.

Stopper Knot Tying Instructions

Take both ends and pull them tightly. In this post, we’ll walk you through the process of knotting a needle in a clear and step-by-step manner.

  1. Thread the Needle Begin by threading the fishing line into the eyes of the needle. Place your hands between the line’s end as well as your needle’s eye using one hand, then employ the second hand to wrap your line around it 2 to three times.
  2. Form the Loop Then Use the hand holding the line and needle to create loops by pulling an end across the line wrapped and then it back towards the needle.
  3. Create another loop. Take the line’s end and make a new loop with the needle. The loop should be made with the reverse direction to one loop.
  4. Wrap the End around the Needle. Using the tip of the needle, you can wrap it around the needle, and then both loops. Repeat the process two or three times, making sure the wraps are tightly wrapped and.
  5. Thread the End Through the Loops. Take the line’s end and pass it through the loops that you made in steps two and three. Make sure you pull the end completely across the loops till the knot is tight.
  6. Tie the Knot the needle using one hand, and hold the end of the line using another hand. Slowly remove the line from the needle and tighten the knot each time. Once the knot is secured then use scissors to cut any thread or line that has escaped.
  7. Check the Knot Last but not least, give your knit an easy tug to confirm that it is sturdy and secure. If the knot is secure, you’re prepared to start sewing or fishing.

How Can I Easily Tie a Knot in Thread?

How to tie thread? How to thread a needle? If your boss gives you a stack of chef’s jackets that require 12 buttons and tells you it’s okay to go home earlier after you’re done, you won’t have the time to fumble with knots that are slow (or threading needles) Every second counts!

The strands of thread over your finger form a loop. Put your index finger to join the thread and slide your thumb across your fingers the thread will then roll into knots.

Hold it with your thumb with your fingers. It’s not easy to master the process, but when it does click you’ll be thankful. I’ve found that it is not effective when you have extremely dry skin, so apply a little lotion in case you’re experiencing problems.

Well how to Tighten a Thread Knot?

For strong sewing, your thread has to be secured with a strong grip on the fabric. One of the most effective ways to achieve this is to tie knots on the length of thread that you plan to stitch. It is recommended to tie a knot onto the thread before beginning sewing.

Here’s how you make the knot of the thread of a sewing machine.

The first step is to ensure that you’ve threaded correctly the needle that you plan to sew. Be sure your thread length is sufficient. Make sure that you pull both ends and then roll them around your fingers while attaching the loose end using your thumb. 

You can roll the thread several times around your fingers to increase the length of the knot. While holding tightly the thread you’ve rolled onto your finger then tightly pull the thread to tie the knot. The knot will be at the beginning of your stitch when you begin sewing.

How Can You Prevent a Messy Knot When Sewing?

How to tie a knot sewing? A lot of times, while sewing your thread, it can tangle into a messy knot. This is often because of the tiny tension of the needle, which occurs every time we create stitches. Sometimes, we’re unaware that the twisting occurs. In the end, just a couple of stitches later in the process, we are in a mess. The knot is tangled and can slow the process.

To ensure that you don’t waste time sewing, be aware of how to stop this mess from occurring. It’s simple and will help you achieve a better result. For every stitch, you create; spin your needle until the thread remains straight and straight. This will make sure that you don’t get any ugly or unwelcome knots.

Frequently Ask Questions

Which Hand Do Women Tie With Thread?

It is common for Hindus in India to tie a red thread typically referred to as a Mauli, or kava to the wrist at the beginning of religious ceremonies. The thread is tucked on both wrists of males and the right wrist for women.

Do you know how to knot a double knot on the other end of the thread?

Cut the thread below the needle, and tie the two halves. If you’ve got plenty of thread left, you can leave a tail of about 2-3 inches to make knotting the knot much easier. 

What knot will be tightened but not let loose?

Constrictor knots are considered to be one of the most efficient knots for binding. It is simple and secure, but it’s a tough knot that is difficult to remove or even impossible after it has been tightened. It’s constructed similarly to a clove knot, however by passing one end between the other, creating an overhand knot in the riding turn.

How to tie a knot when sewing?

The mythical Gordian knot might have been difficult to unravel however; this knot is the best in terms of being incredibly tight. It was created by researchers from The University of Manchester, the knot that you see above measures 20 nanometers and 192 atoms strong and is the most secure knot that is known to the human race.


In conclusion of how to tie a needle knot? The art of knotting a needle might be difficult initially but, with time, you’ll be able to master this essential ability. Make sure to tie the knots tight to give you maximum strength. By following this step-by-step guide you’ll be able to tie knots in no time, and you’ll be able to enjoy your sewing and fishing tasks with absolute confidence.

Related Reading

Leave a Reply

Your email address will not be published. Required fields are marked *

best thread for sewing machine

Previous Post

Best Thread for Sewing Machine: A Comprehensive Guide

Next Post

Best Portable Sewing Machines You Can Buy (2023 Reviews)

Best Portable Sewing Machines