How To Hem Pants Without A Sewing Machine

  • By: joleenllorence
  • Date: November 28, 2022
  • Time to read: 6 min.

The skill of hemming your pants is very common and essential, this skill comes in handy most of the time such as when you order pants online and you got long pants. There are many pants such as jeans, chinos, slacks, etc. which look good only because of their length and have a surprising effect on your look.

You can also go to the tailor for getting your pants hemmed but it will cost you around $10 to $20, then why not save money and do it yourself? How to do them without a sewing machine may seem difficult but it is not so hard. You can do this easily if you follow all the steps given below.

1. Hem Pants Using Wonderweb

Hem Pants Using Wonderweb

how to hem pants without a sewing machine is a bit tricky but with the help of wonderweb you can easily carry this process. It may be time-consuming but the results would be great. Make sure you follow all the steps given below.

Step 1:

If the pants you are hemming have a finished bottom then you can move to the next step. If not, then you will need to undo the previous hem after turning the pants inside out.

Step 2:

Take another pair of pants whose length is correct, then place it over the pants with a long length. Measure the length and the waistband.

Step 3:

Once you have measured the length and the waistband, make sure you mark it on the pants you want them. The mark should be all around the button, for marking you can use chalk.

Step 4:

After that cut the extra length of the pants, but make sure you leave an inch or half more than the mark. If the fabric of the pants is prone to unraveling, fraying, or rolling then you can prevent it by using pinking shears.

Step 5:

Now, take the wonderweb and place it inside around the bottom of the pants. The wonderweb is the glue that melts on heating.

Step 6:

Take the bottom of the pants leg and place them flat on a table. There you may see that the chalk mark is visible, you can hide that mark by bending the leg but make sure that the leg stays flat from the inside.

Step 7:

Now, you will need to melt the wonderweb with the help of a steam iron. Make sure you also press the bottom of the pants with a cloth, because any little marks on the pants disappear after pressing it.

Also Read: How To Hem Jeans Without A Sewing Machine

2. Shorter Your Pants with Hem Tape

Shorter Your Pants with Hem Tape

How to make pants shorter without sewing by using the hem tape is also very simple, this process is a little bit similar to the previous one. The results of this process are great but it may consume a lot of your time. For shortening your pants without a sewing machine you will need to follow the steps given below.

Step 1:

First of all, turn the pants inside out and undo the previous hem by placing the pants on a suitable ironing surface such as an ironing board.

Step 2:

Then you will need to turn the pants outside in and measure them, then mark how short you want the length of the pants with the help of chalk.

Step 3:

Cut a piece or stripe of the hemming tape and wrap it around the bottom of the pants leg.

Step 4:

Start folding the pants leg from the bottom until you reach the measurement mark you just made before.

Step 5:

Take a tea towel and place it under the cold tap, after that drench it properly. Make sure it’s not dripping.

Step 6:

Place the tea towel you just wet on the bottom of the pants, the area which you just folded.

Step 7:

Now, you will need to iron the tea towel and make sure that the iron is not too hot. Then press the iron on the cloth for at least 10 seconds, but if you think that the fabric can get damaged then you can try pressing for 5 seconds.

You May Interested In: How To Make A Dress Bigger Without Sewing

3. Double-sided Tape and Velcro Straps

Double-sided Tape and Velcro Straps to shorter pants

If you are looking for a way to hem pants without sewing or tape then here it is, with this method you can easily hem your pants temporarily without sewing or tape. Make sure you follow all the steps properly.

Step 1:

First of all, you will need to wear pants and measure the length you want on each side of the pants, you can take help from anyone for measuring. Make sure you mark that length with chalk.

Step 2:

Then you should fold the bottom of the pants until you reach the measurement mark you just made in the previous step.

Step 3:

Then take the velcro strap and place it on the folded bottom of the pant, which is your desired length of the pant.

Step 4:

Now, take the double-sided tape and place it on the pants, it is to connect the velcro straps with the pants.

Step 5:

It is an easy and effective method as you can also change the position of the velcro strap and double-sided tape anytime and at any length.

Did You Know: How To Embroider Letters With Sewing Machine

4. How to hem your pants with Fabric Magnets

hem pants with fabric magnet

How to shorten pants without sewing is very easy if you have fabric magnets available. Using fabric magnets for shortening a pant is a good choice as they hem the pants and also make them look cute. If you don’t know how to use the fabric magnets then make sure you follow all the steps given below.

Step 1:

First of all, wear pants and shoes, then decide how much length you want for the pants. Wearing shoes is necessary to know which is the right length for the style you want.

Step 2:

Then start making an upward fold from the bottom to the top of the pants until you are satisfied with the length of the pants, then make a downward fold. It will help to make it lie directly on the top of the hem of the pants on top of the shoes.

Step 3:

Now, it is time to use your fabric magnets or hem gems, they are also known as hem gems because they look like gems or earrings. Fabric magnets come in pairs, one is positive and the other one is negative. You will need to place one magnet inside the fold, but keep the other one outside.

Step 4:

Once you have placed both of the magnets in their places, they will hold the pants tightly and will not let them fall.

Step 5:

It is a temporary method for shortening your pants, so whenever you want to take the pants off make sure you first pull the fabric magnets out and then store them.

6 Tips to Hem Pants Without A Sewing Machine

Tips to Hem Pants Without A Sewing Machine
  1. Make sure you pre-wash your pant before hemming them, as they can shrink after being washed
  2. Always measure the pant while wearing it
  3. Make sure that the iron is not too hot when melting wonderweb or hem tape
  4. Always undo the previous hem of your pants
  5. Use pins for holding the fold
  6. Use pinking shears for cutting the fabric

Conclusion

Hemming pants is very important as the length of the pants describes their looks and style. Most don’t use a sewing machine for that purpose, but most people don’t have a sewing machine or they don’t know how to use it.

So, that’s why we present you some easy-to-apply methods and tips through which you can hem your pants. Some of the methods are for permanent hemming but some are for temporarily hemming the pants. We hope you enjoyed reading this guide and got the information you needed.

Read More:

  1. How To Shorten Curtains Without Sewing – 3 Ways you can do
  2. How to Appliqué with Fusible Web
  3. 7 Tips for Appliqueing with multiple fabrics
  4. Left-handers: How to Cut with Right-Handed Scissors

Leave a Reply

Your email address will not be published. Required fields are marked *

How to Make a Shirt Fitted without Sewing

Previous Post

How to Make a Shirt Fitted without Sewing – 8 Ways

Next Post

Best Embroidery Machines for Hats to Get in 2022

Best Embroidery Machines For Hats